User Tools

Site Tools


Action disabled: revisions
next_steps:home

Table of Contents

The Next Steps

Once you're connected into AREDN over the internet, the next step is to add an RF link. For that, a second device can be placed outside and connected back to the hAP via CAT5e. For this, you can use:

Note that: Only equipment listed on the support matrix and the device selection spreadsheet will work with the AREDN firmware. See here for more details.

Mapping

These sites are useful to model line of sight and the Fresnel zone:

Nodes

See the setups page for a list of sector antennas currently online.

NPR

NPR (New Packet Radio) is a custom radio protocol, designed to transport bidirectional IP trafic over 430MHz radio links (ham radio frequencies 420-450MHz). This protocol is optimized for “point to multipoint” topology, with the help of managed-TDMA. Bitrate is 50 to 500kbps (net, effective bitrate), depending on the RF bandwidth chosen. –Hackaday Project Page

See our NPR page for more details on how to integrate this with AREDN.

next_steps/home.txt · Last modified: 2023/10/15 08:09 by va7fi