West Coast
AREDN

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== VOIP (FreePBX) ======
{{ img_20211104_230935101.jpg?300|}}
If you’re interested in having your own mesh phone extension on our local PBX, please reach out to our [[https://groups.io/g/Mid-Island-AREDN-Mesh-Network/topic/phone_directory/81423119 |Groups.io]].

  * Here is our [[services/voip/directory |local phone directory]].
  * How to use [[services/voip/voicemail|voicemail]] (on the SAP525G)
  * We have a bi-weekly AREDN net every other Sunday at 7pm on our conference line, and zoom meetings on the other Sundays.
  * More information from [[https://www.arednmesh.org/content/ip-phones-used-mesh|arednmesh.org]]
  * More information from this [[https://groups.io/g/Mid-Island-AREDN-Mesh-Network/topic/voip_phones/81263965 |Groups.io thread]].
  * N2MH has a lot of information on his [[aredn>http://n2mh-meshphone2.local.mesh/meshphone/index.html |AREDN page]], and maintains global [[aredn>http://n2mh-meshphone2.local.mesh/meshphone/whitepages.php|white pages]].

<WRAP center round tip 80%>
The following instructions are to connect to our local PBX.  However, it's also possible to make direct phone-to-phone connections without a PBX.  [[/services/voip/directIP |Instructions are here]].
</WRAP>


===== Cisco SPA525G2 Setup =====
Most of our users have Cisco SPA303 or SPA5xx series devices, however any IP Phone with SIP firmware will function.



==== IP Address ====
After connecting the phone into the hAP:
  * Navigate to the ''Port Forwarding, DHCP, and Services'' page and note the IP address of your phone.
  * The Hostname will be different and will be setup later in the phone settings.
  * At the end of the setup, we'll come back to this page to add the DHCP reservation (but not yet).{{ aredn_dhcp.png }}
  * Now use your IP address and navigate to [[http://10.xxx.xxx.xxx/admin/advanced]]


==== System ====
Click on ''System'' tab.
  - Enter an (optional) ''Admin Password '' and/or ''User Web Password''.  But note that:
    * the ''Admin password'' will be required to navigate to [[http://10.xxx.xxx.xxx/admin]] with the username ''admin''.
    * And the ''User Web password'' will be required to navigate to the other pages with the username ''user''.
  - Enter your ''HostName''
  - Enter the following ''Primary NTP Server: ca.pool.ntp.org''
  - <wrap important>Don't click <key>Submit All Changes</key> yet.</wrap>{{ voip_system.png }}{{ voip_login.png }}

==== Regional ====
Click on the ''Regional'' tab.
  - Scroll to the very bottom of the page and ensure the Time settings are correct:{{ voip_regional.png }}

==== Phone ====
Click on the ''Phone'' tab.
  - Enter the ''Station Name'', ''Voice Mail Number: *97'', and ''Station Display Name''
  - Enter ''Line Key 1'' information with your callsign and extention number
  - ''Line Key 2'' to ''Line Key 5'' are quick dial buttons.  The ''Extended Function'' text is of the form ''fnc=blf+sd+cp;sub=2400@$PROXY'' where the number (here 2400) is the extension number.{{ voip_phone.png }}

==== Ext 1 ====
Click on the ''Ext 1'' tab.
  * Under the ''Proxy and Registration'' section, enter the following IP address: ''10.246.225.227''
  * Under the ''Subscriber Information'' section, enter
    * Your ''Display Name''
    * The ''Password'' that was assigned to you by Kyle, VE7ODG
    * Your extenssion as the ''User ID''
<WRAP indent>{{ voip_ext1.png }}</WRAP>

==== Att Console ====
Click on the ''Att Console'' tab
  * Change the ''Server Type'' to ''Asterisk''{{ voip_att_console.png }}
  * If you have an Attendance Console (sidecar) and would like to program the speed dial buttons, follow the example here. Make sure you change the extension number and the name for the contact you want to add. Here's a {{aredn_telephone_template_sidecar.doc|printout for the SPA500S Sidecar}}.{{ voip10.png }} 
  * Here is a copy and paste example of the code: ''fnc=sd+cp+blf;sub=2202@$PROXY;nme=VE7LSE-2202''

==== Saving Changes ====
  * It's alost time to save the changes, but first, make sure you remember your ''admin'' and ''user'' passwords on the [[home#system|System]] tab.  You'll need them to come back to the settings after your phone reboots.
  * Click on <key>Submit All Changes</key> when ready and what for your phone to reboot.


==== DHCP Reservation ====
Now that the phone is all setup, go back to your hAP settings and
  * Add its address to the DHCP reservation.{{ aredn_dhcp.png }}
This step ensures that if the hAP reboots and starts giving out IP addresses to your connected devices, it'll keep the same one for your phone.  This is important because if your phone gets a different IP address from the hAP, the phone settings won't match anymore.